ACTIVATION_STATUS

Activation Status

An enumerated value of the host activation status. This Info Item can be used to monitor activation status. The values for SVMACTSTAT include:

• 0 (UNKNOWN)
• 1 (TRIAL)
• 2 (ENABLED)
• 3 (DISABLED)
• 4 (EXPIRED)
• 5 (ERROR)
• 6 (CODE CALC ERROR)

SVMACTSTAT

ACTIVATION_STAT_DESC

Activation Status Desc

A string value description of the host activation status. This Info Item can be used to monitor activation status. The values for SVMACTDESC include:

• UNKNOWN
• TRIAL: X (where x is number of days remaining)
• ENABLED
• DISABLED
• EXPIRED
• ERROR
• CODE CALC ERROR

SVMACTDESC

BACKUP_DURATION

Backup: Last Duration

The duration (in seconds) of the last backup.

SVMBUDUR

BACKUP_NEXT_RUN

Backup: Next time to run

The timestamp when the service’s next backup will be run. The value is a string value in UTC time format.

SVMBUNEXTT

BACKUP_PATH

Backup: Destination Path

The path to the backup directory for the service files.

-

has no UDC

BACKUP_STATE

Backup: Current State

Specifies the status of the current backup process. The values for SVMBUSTATE include:

• 0 is idle (backup process is not running)
• 1 is backing up (backup process is running)

SVMBUSTATE

BACKUP_TIME_SUCCESS

Backup: Last Success Tm

The timestamp when the service’s backup was last completed successfully. If no backup has run, returns no value. The value is a string value in UTC time format.

SVMBULASTT

COPY_BACKUP_TO

Backup: Copy path

The path that the backups are copied to following a successful backup.

-

has no UDC

CURR_TIME_LOCAL

Curr Time Local

The current time in the service’s local time.

SVMCTIMEL

CURR_TIME_UTC

Curr Time UTC

The current time in UTC time.

SVMCTIMEU

DATA_DIRECTORY

Service data directory

The directory where the data file for the service is located. That is, the location of the <ServiceName>.dat.edb.

-

has no UDC

DCL_VER

DCL Ver

The version of DCL used by the service in n.n.n.n format.

-

has no UDC

EXE_ARCH_TYPE

EXE Architecture

The architecture type of the service, for example, x86, x64, etc.

-

has no UDC

EXE_NAME

Exe Name

The executable name in FILE NAME.exe format. Includes full file path if less than 50 characters.

SVMEXEN

EXE_SIZE

Exe Size

The executable size, returned as an integer.

SVMEXES

EXE_TIME

Exe Time

The executable time in YYYYMMDDHHMMSSmmm UTC time format.

SVMEXET

EXE_VER

Exe Ver

The executable version in n.n.n.n format.

SVMEXEV

FAILOVER_READINESS

Failover readiness

Indicates the readiness of the service to start a failover. The values include:

• Not ready — The service is Not Ready if

• the REPL_SUMMARY_STATE Info Item is 'Invalid' or 'Unknown' and
• the FAILOVER_STATUS Info Item is any value other than 'Normal'.

• Ready — The service is Ready if

• the REPL_SUMMARY_STATE Info Item is 'Valid' and
• the FAILOVER_STATUS Info Item is 'Normal'.

• Unknown — The failover readiness of the service is unknown.

SVMFOREADY

FAILOVER_STATUS

Failover status

Indicates the current failover status of the service. The values include:

• Not redundant— For a non-redundant service.
• Normal — Not currently doing a failover. Applies to all services.
• Waiting — Waiting for the next step in the failover sequence. Applies to all services.
• Freezing — In the process of stopping all processing. Applies to all services except RSM.
• Frozen — All processing has stopped. Applies to all services except RSM.
• Replicating — The service is catching up on replication. Applies to all services except RSM.
• Processing — The master RSM service is doing work. Applies to the master RSM only.
• Pre-failover — The RSM is waiting for all services to synchronize. Applies to RSMs only.
• Starting — The service is starting a failover. Applies to RSMs only.
• Failover — Switching services from standby to active. Applies to RSMs only.
• Post-failover — Starting standby services and changing replication source of indirect services. Applies to RSMs only.
• Aborting — Aborting failover. Applies to RSMs only.
• Error — The service is in error. Applies to all services except RSM.
• Monitoring — Not currently doing a failover, but monitoring the state of the RSM on the Primary Active Server. Applies to RSMs only.
• Unknown — The failover status of the service is unknown.

IN_REDUNDANT_SET

Service in redundant set

Indicates whether this service is part of a redundant relationship. The value equals the REDUNDANT keyword in the service configuration file.

SVMINRDSET

LOGERRORS_ELS

Log Writ Errs to the ELS

The number of log entries that could not be sent to the ELS, returned as an integer.

SVMLOGSERR

LOGERRORS_FILE

Log Writ Errs to Log Fil

The number of log entries that could not be written to the log file, i.e. due to out of disk space, returned as an integer.

SVMLOGFERR

LOGFILE_FILE_COUNT

File Cnt

The number of log files configured for the service, returned as an integer.

SVMLFFC

LOGFILE_FILE_SIZE

File Size

The size limit (in megabytes) for each log file configured for the service, returned as an integer.

SCMLFFS

LOGFILE_LIMIT_MODE

Limit Mode

The operational mode for limiting the size of each log file: LINE or SIZE, returned as an integer.

-

has no UDC

LOGFILE_LINE_COUNT

Line Cnt

The maximum number of lines for each log file configured for the service, returned as an integer.

SVMLFLC

LOGFILE_MODE

Logging Mode

The operational mode for maintenance of log files: LEGACY or EXTENDED, returned as an integer.

-

has no UDC

LOGMASK_ELS

LMask ELS

The current log level settings for the ELS, returned as an integer.

SVMLOGME

LOGMASK_ELS_CFG

LMask ELS (cfg file)

The log level settings for the ELS, as specified in the service’s configuration file, returned as an integer.

-

has no UDC

LOGMASK_FILE

LMask File

The current log level settings for the log file, returned as an integer.

SVMLOGMF

LOGMASK_FILE_CFG

LMask File (cfg file)

The log level settings for the log file, as specified in the service’s configuration file, returned as an integer.

-

has no UDC

LOGWRITES_ELS

Log Writes to the ELS

The number of service log writes to the ELS, returned as an integer. A jump in the number of log writes is probably indicative of a problem.

SVMLOGSWRT

LOGWRITES_FILE

Log Writes to Log File

The number of log writes to log file, returned as an integer.

SVMLOGFWRT

MSS

Associated MSS

The MSS service associated with the UIS service.

SVMUISAMSS,

SVMAMSS

PENDING_AUD_NOTIF_TX

Count Pending Audit TX

The total number of pending audit transactions to send to the AUD.

SVMNOTEAUD

PERFMON_TIME_UTC

Performance Monitor Snapshot Time

The last timestamp of performance monitor snapshot in UTC time format. Performance monitor snapshot includes a machine and process performance statistics.

-

has no UDC

SRVNET_ACT_MSGS

Act Msgs

The number of active messages.

SVMAMSG

SRVNET_CLIENTS_REGED

Active Clients
Count

The number of active clients. This is a count of the number of clients that have issued a message to the service within the past hour.

SVMACLI

SRVNET_CURR_TIME_LOCAL

Curr Time Local

Same as CURR_TIME_LOCAL above.

SVMCTIMEL

SRVNET_CURR_TIME_UTC

Curr Time UTC

Same as CURR_TIME_UTC above.

SVMCTIMEU

SRVNET_DOMAINID

Service domain

The domain ID to which this service belongs, the ambient domain.

-

has no UDC

SRVNET_IPADDR

IP Address

The IP address of service.

SVMIPADDR

SRVNET_IPPORT

TCP/IP Port Number

The UDP port number on which this service is running.

SVMIPPORT

SRVNET_MSGS_IN

Msgs In

The number of messages received from clients. Most useful in conjunction with a rate.

SVMMSGIN

SRVNET_MSGS_OUT

Msgs Out

The number of messages received that were replied to. Does not include messages initiated by the service.

SVMMSGOUT

SRVNET_START_TIME_LOCAL

Start Time Local

Same as START_TIME_LOCAL.

SVMSTIMEL

SRVNET_START_TIME_UTC

Start Time UTC

Same as START_TIME_UTC.

SVMSTIMEU

SRVNET_STATS_TO

T.O. Stats

Messaging statistics timeout length in number of seconds.

SVMSTATSTO

START_TIME_LOCAL

Start Time Local

Same as SRVNET_START_TIME_LOCAL.

SVMSTIMEL

START_TIME_UTC

Start Time UTC

Same as SRVNET_START_TIME_UTC.

SVMSTIMEU

SVC_RUN_TIME

Service Run Time (secs)

The number of seconds for which the services has been running.

-

has no UDC

TRIAL_DAYS

Activation Trial Days

The number of activation trial days remaining.

SVMACTDAYS

UTC_OFFSET

Service UTC offset

The offset from the UTC time for the service in minutes.

-

has no UDC